Why you should ditch those old bathroom lamp heaters for IP65 Infrared
Let’s be honest: those old-school lamp heaters are kind of a nightmare in a bathroom. They just aren’t made for the steam. Water vapor sneaks into the housing, messes with the wiring, and before you know it, the whole thing burns out. It’s a cycle we’ve seen way too many times. That’s why we’re seeing everyone switch to IP65-rated infrared heaters. It’s not just a fancy label; it’s about actually keeping the water out. What’s the deal with IP65? Basically, it means the unit is sealed tight. No dust gets in, and more importantly, water jets or heavy steam can’t reach the electrical guts. We use heavy-duty gaskets and housings that don’t rust, so the insides stay bone-dry. Standard heaters? They leak. They short out. They’re just not built for a shower-heavy environment. The feeling of actual heat Here is the cool part. Most heaters try to warm up the air. But if you’ve got a drafty bathroom, that warm air just floats away the second you turn on a vent. Infrared is different. It doesn’t bother with the air—it sends out waves that warm you and the surfaces around you directly. It’s that instant, cozy feeling the second you step out of the shower and onto a cold floor. No waiting around for the room to warm up. Just immediate warmth. A few things to keep in mind Now, you can’t just plug these into a random extension cord. Because they pack so much heat, they need their own dedicated circuit. If you try to shortcut that, you’re probably going to trip a breaker. Also, placement matters. Since the heat is so direct, you don’t want to mount the unit too low, or it’ll feel like you’re standing too close to a campfire. You’ve got to get the height just right based on how powerful the unit is. We build these things to actually last. By locking out the humidity, we stop the corrosion that usually kills a bathroom heater in a couple of seasons. It’s a simple swap that puts safety and longevity first, rather than just being the cheapest option on the shelf.